Skip to main content
中文

Zeller+Gmelin Multidraw Drylube E 1 20L/Drum

Zeller+Gmelin Multidraw Drylube E 1 20L/Drum

Overview

Zeller+Gmelin Multidraw Drylube E 1 is a hotmelt coil lubricant that forms a touchable semi-dry film with good flexibility and sliding performance for steel, galvanised, pre-phosphatised, aluminium and stainless sheets. Applied hot by electrostatic oiling at rolling mills, it supports demanding automotive body sheet forming and meets German VDA performance requirements.
Pack sizes
20LOn request
Application areas
Automotive Steel & Metallurgy
Get a quote TDS SDS/MSDS

Description

Zeller+Gmelin Multidraw Drylube E 1 is a hot-melt coil-coating lubricant for sheet-metal forming and can be used on steel, zinc-coated steel, pre-phosphated steel, aluminum and stainless steel. After application it forms a touch-dry, semi-dry film whose flexibility and sliding properties support demanding forming operations. The product is normally applied in rolling mills by electrostatic oiling while in the liquid state and must be heated for correct application. It complies with the relevant VDA performance requirements of German automotive manufacturers, making it suitable for automotive sheet preparation and other forming operations that benefit from a clean, solidifying pre-lubricant film.

Applications

  • Multidraw Drylube E 1 is a coil coating lubricant for all kinds of metal (steel, zinc coated steel, pre-phosphatized steel, aluminium and stainless steel). Application is usually done by electrostatic oiler.

  • After being applied, the product leaves a touch-dry coating on the metal surface. Due to its good flexibility and sliding properties, the semi-dry film enables difficult forming operations.

  • Multidraw Drylube E 1 is preferably applied in rolling mills by electrostatic application in liquid condition. Before applying, Multidraw Drylube E 1 must be heated up to 70 °C. In filter systems, the temperature should not fall below 60 °C. The solidification point is approx. 40 °C.

  • In case the lubricant remains in the storage tank in stand-by mode for a longer period, we recommend a temperature of 50 – 60 °C.

  • In heated tanks Multidraw Drylube E 1 should constantly be circulated to guarantee a uniform temperature distribution.

  • Technical note: At a temperature of 60 °C, the product has a density of 0.867 g/cm³ (DIN EN ISO 12185).

Product photos

Zeller+Gmelin Multidraw Drylube E 1 20L/Drum

Technical data

Colour / Appearance solid/brown
Density/15°C / DIN 51 757 870 kg/m³
Viscosity/100°C / DIN 51 562 11 mm²/s
Flash point (Cleveland) / DIN ISO 2592 > 220 °C

Pack sizes

Pack sizeContainer MOQAvailability
20L On request

Documentation

Application areas

More from this brand

More in this family

View all products from this brand