Zeller+Gmelin Multicut FU 33 is an EDM dielectric with a low viscosity of about 3.4 mm2/s…
Zeller+Gmelin Multicut FU 33 20 L/Drum
Stock on request
Ready Stock
Zeller+Gmelin Multicor DW 3 Spezial Light is a dewatering corrosion-protection fluid with strong creeping and penetration properties. It displaces water and moisture from metal surfaces while leaving a very thin, transparent and slightly oily protective film. The product is used for drying wet small parts and mass-produced components to reduce water spotting and provides temporary surface protection during intermediate storage and transport under normal Central European climatic conditions. Because of its excellent creeping behavior, it is also suitable for the internal preservation of hollow components. Application can be by dipping, spraying or manual brushing in the delivered condition.
Water displacement: Penetrates and displaces moisture from the workpiece surface, helping wet parts dry.
Thin-film protection: Forms a transparent, slightly oily protective film of approximately 1–2 μm, reducing the risk of water spotting and short-term corrosion.
Good penetration: Can be used for temporary internal rust protection of complex structures and hollow parts.
Wide applicability: Suitable for inter-process protection of small metal parts, batch-processed workpieces and mechanical components.
Flexible application: Can be applied directly by dipping, spraying or brushing.
Storage and transport protection: Provides protection for approximately 6–12 months indoors and 3–6 months outdoors under cover, with actual results affected by environment and packaging.
Technical data for this item is being compiled. Use “Request TDS” on the right for the full datasheet.
| Pack size | Container | MOQ | Availability |
|---|---|---|---|
| 200L | On request |
Zeller+Gmelin Multicut FU 33 is an EDM dielectric with a low viscosity of about 3.4 mm2/s…
Stock on request
Ready Stock
Zeller+Gmelin Multicut Micro SP 51 is an MQL micro-spraying cutting oil on refined…
Stock on request
Ready Stock
Zeller+Gmelin Multicut Stamp CF 140 is a high-performance, non-water-miscible stamping…
Stock on request
Ready Stock
Zeller+Gmelin Multicut special 10is a universal zinc-free, low-aromatic, low-oil-mist non…
Stock on request
Ready Stock
Zeller+Gmelin Divinol HVLPD ISO 46 20L/Drum is a high-viscosity-index…
Stock on request
Ready Stock
Zeller+Gmelin Multicor LF 80 is a solvent-free mineral-oil-based preservative forming non…
Stock on request
Ready Stock
Zeller+Gmelin Multidraw Drylube E 1 is a hotmelt coil lubricant that forms a touchable…
Stock on request
Ready Stock
Zeller+Gmelin MULTIDRAW DRYLUBE E1 is a hotmelt coil lubricant that forms a touchable…
Stock on request
Ready Stock
Castrol Braycote 236 is a technical grade petrolatum forming a soft flexible coating for…
Stock on request
Ready Stock
Castrol Braycote 194 is a solvent cutback corrosion preventive compound applied cold…
Stock on request
Ready Stock